Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Tools
- 1-Freewheel turner for 1/8" fixed gear sprockets.
- 1-2 in 1 cotterless crank tool for both standard square type and Shimano octalink
- 1-Multi-function pedal wrench, 15 mm pedal wrench with 8 / 10 mm hex wrench.
- 1-Freewheel remover for Shimano HG cassettes.
- 1-Chain rivet extractor, for 3/32" to 3/16" chains and 8, 9 & 10 speed chains .
- 1-B.B. wrench, for Shimano Hollowtech II and other external bottom brackets.
- 1-Crank installation tool.
- 6-Hex key, size: 2 / 2.5 / 3 / 4 / 5 / 6 mm, with a holder
- 1-Patch repair kit, self-adhesive patch x 6, sandpaper x 1.
- 1-Spoke wrench, 3.2 / 3.3 / 3.5 mm.
- 1-Adaptor 8 mm hex x 1/2" Dr.
- 1-Double-ended Torx key, T25.
- 3-Tire lever.
- 1-Blow case
$4.99
1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt
$4.99
Double-ended to fit most slotted-type nuts, the other side is the tool to remove the dust cap out of the cranks, using a hex key you can easily install/remove the chaining bolts.
$6.49
Removes SunTour® 2-notch freewheels. Not recommended for SunTour® four to six notch freewheels. Use with 23mm wrench.
TB-1035 can be turned with TB-8830.
$7.99 - $11.99
Hex Key Wrench available in two sizes: 2/2.5/3mm and 4/5/6mm
$7.99 - $12.99
Torx Wrench sizes:
#1: Torx T25, T30, T40
#2: Torx T10, T25, T30
TB-2638: Torx T25, T30, T40
$7.99
TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.
$7.99 - $12.99
TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench.
TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.
$7.99
Heat treated and made to last. For 3.2, 3.3, and 3.5mm nipples.
$7.99
- Forged 8 groove spoke wrench
- For spoke tension adjustment on 10G-15G nipples
$7.99 - $8.99
- High grade steel screwdriver
- Ergonomically-designed grip
$9.99
Designed to hold socket to bottom bracket axle to prevent slippage during installation or removal. To be used with square tapered, Octalink and ISIS drive sockets in order to secure the tool to the BB during installation and removal.
$9.99
TB-6617: Cotterless crank tool for Shimano splined octalink and ISIS, Use with 8mm hex key wrench and 15mm spanner.
TB-6616: Cotterless crank tool for use with 8 mm hex key wrench and 15mm spanner.
$9.99
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws
TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses
TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses
TB-1904: 10mm x 1.0, for derailleur hanger
$9.99 - $12.99
-10, 8, and 6mm L-shaped hex wrenches for high-torque applications
- Comfortable rubber grips
- High-quality steel
$11.99
- 2.5/3/4/5/6mm hex key wrench
- +/- screwdriver
- satin finish
$11.99
Removes 4-notch BMX & single and single-speed freewheels.
Use with 24mm wrench.
$11.99
- For Shimano HG Cassettes
- Use with 24mm and 19mm wrench or 1/2" ratchet wrench
$11.99
For Shimano® and some of Shimano®’s disc brake system, SRAM®?SunRace®, SunTour®, Chris King®, and other cassette lockrings.
With a center pin. Use with 24mm spanner.
$12.99 - $14.99
TB-1065: For Shimano® cartridge B.B. & ISIS drive compatible. Use with 1/2” Dr. driver and 24mm wrench. TB-1065 can be turned with TB-8830.
TB-1075: For Shimano® & lSlS drive compatible. Use with 1/2” Dr. air driver.
$13.99
- Set includes one 8mm hex socket and ball-end wrench sizes from 4mm through 6mm.
- Compact enough to carry on a ride.
- Includes durable plastic wrench holder
$13.99
Great tool for riders and home enthusiasts to remove pedals. 15mm wrench size.
$14.99
- For use with most Shimano hubs
- Use with 24mm wrench or 1/2" Dr. wrench
$15.99
- 2/2.5/3/4/5/6/8mm hex key wrench
- Phillips screwdriver
- T25 Torx
- Satin finish
$15.99
- 2-in-1 cotterless crank tool for standard square type and Shimano splined octalink and ISIS
$15.99
- L-handled Allen wrenches
- Comfortable, ergonomic grips
- High-quality steel construction
- Available in 2.5, 2, 3, 4, 5, 6, 8, and 10mm sizes
$16.99 - $21.99
2-in-1 cotterless crank tool for standard square type crank, Shimano splined octalink and ISIS.
$19.99
Commonly referred to as the "4th Hand". The Cable Stretcher pulls cables tight with ease.
$19.99
MW50 - 15mm pedal wrench and 14x15 box wrenches.
MW60 - 15mm pedal wrench and hex 8x 10mm.
$19.99
Features two different slot depths. Made from high quality steel to gently adjust bent or damaged brake rotors.
$21.99
- 2/2.5/3/4/5/6/8mm hex key wrench
- Spoke wrench (3.2mm)
- +/- screwdriver
$21.99
- High quality bracket rool, easily assemble the lockring of bottom brackets
- Fits most lock-rings
$23.99
- BB wrench for Shimano Hollowtech II, Truvativ GXP, FSA and Campagnolo, and other similar types of cups with 16 external notches
- Use with 32mm wrench or 1/2" Dr. ratchet wrench
$23.99
Used to install and disassemble Shimano Hollowtech II, Truvativ, FSA Megaexo, Giga X-pipe, Campagnolo Ulta-Torque and other external bearing bottom brackets.
$23.99 - $29.99
- Freewheel remover for Shimano HG cassettes with center pin
$29.99
The Trident is a patented, award-winning, 2-in-1 master link pliers. Easy to use and built to last. Allows for the master link to be installed and removed by hand.
$29.99 - $35.99
- BB wrench for use with Shimano Hollowtech II, Truvativ GXP, and FSA
$29.99
Chain rivet extractor fits 1/8" to 3/16" chain only. Chain pin guide with 1 spare pin.
Page 1 of 2
Next page