1050 Brock Rd, Unit 1, Pickering ON L1W 3X4  | (905) 837-2906     

Filter By:

  • Show More Brands
  • Show Fewer Brands

Riser

TruVativ Stylo T20 Riserbar
$39.99
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Stylo T20 Flatbar
$31.99
TruVativ's Stylo T20 Flatbar is made from butted aluminum for low weight and high strength. At 600mm wide, it gives you a nice XC width without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
Salsa Rustler Bar 2
$124.99
Point your bike toward adventure with Salsa's Rustler Bar 2. This strong, lightweight aluminum handlebar features a 20mm rise and wonderful 750mm width to put you in control on every trail.
Spank Tweet 720 Handlebar
$87.99
Spank's Tweet 720 handlebars have earned a spot on your dirt jumper. 6 Series aluminum is light and tough, so you can fly high and stick the landing. XGT tech offers a consistent taper for the whole length of the bar, eliminating stress risers for a more durable product.
Race Face Atlas Riser Handlebar
$89.99 - $104.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Race Face NEXT 3/4
$169.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm
Pro Tharsis XC Flat Top Di2 Handlebar
$279.99
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 160g - Di2 compatible with internal wire routing - 720mm wide - 31.8mm clamp diameter - 5mm rise
Pro Tharsis XC Riser Handlebar
$244.99
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 173g - 740mm wide - 31.8mm clamp diameter - 15mm rise
Whisky Parts Co. No.9 Carbon Rise Handlebar
$262.99
Whisky Parts Co. carbon handlebars are tested to the highest standards to give you a high level of performance mile after mile. So keep the weight low and stay comfortable and in control while you shred with the Whisky Parts Co. No.9 Carbon Rise Handlebar. - 5 Degree Upsweep - 9 Degree Backsweep - Trimmable ends - Matte UD full carbon construction - 258 grams
TruVativ Descendant Carbon Riser Handlebar
$235.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
TruVativ Descendant Downhill Riser Handlebar
$109.99
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
TruVativ Descendant Riser Handlebar
$101.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
Spank Oozy Trail 760 Bar
$109.99 - $114.99
The strength and stiffness of a gravity bar with trail tuned geometry and weight. SPANK Industries’ OOZY Trail 760 bar is dialed to enhance your trail experience. Boasting Super 6 alloy construction and Dual XGT tapers, the OOZY Trail 760 is exceptionally durable without tipping the scales. SPANK's patented CNC bending process ensures that every OOZY Trail 760 bar is precision tuned to the optimum trail geometry, which puts the rider in a balanced position and enhances front wheel traction. The result: a wide, bulletproof, competitive weight trail bar that offers enhanced climbing and stability. - Key Technologies: Dual XGT, CNC Bending - Material: MGR Super 6 Alloy - Weight (g): ±290 (5mm) / ±300 (15mm) / ±300 (30mm) - Diameter (g): 31.8 - Rise (mm): 5 / 15 / 30 - Length (mm): 760 (Adjustable to 730) - Geometry (deg): 4° up x 6 ° back - Finish: Shotpeen anodized, decal logos - Discipline: Trail
TruVativ Descendant Troy Lee Design Handlebar
$135.99
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
Radio Nemesis Bar
$104.99
The Radio Bikes team wanted a tough do-it-all bar with a classic look, so the Nemesis bar uses dual radius design for smoother bends, as well as more resistance to bending. Paired up with fully heat-treated and multiple butted 4130 Chromoly tubing, the Nemesis bar features classic geometry and is available in both 9.25" and 9" rises to keep everyone happy.
TruVativ Holzfeller Riserbar
$86.99 - $87.00
TruVativ's burly Holzfeller Riserbar is made from butted 7050 aluminum to take gravity-fueled abuse like a champ. This 730mm-wide bar gives you awesome leverage to muscle your rig and the rise gives you an upright position for greater control in nasty rock gardens as well as increased confidence on steep descents.
Thomson MTB Carbon Cross Country Handlebar
$199.99
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Thomson Aluminum Handlebars - Trail
$145.99
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
Thomson MTB Aluminum Downhill Handlebars
$145.99
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
Spank Spoon 785 Bar
$70.99
The SPANK SPOON 785 handlebar is the cost effective upgrade to your cockpit. Built from MGR six series alloy the SPOON 785 Bar is rock solid in the park or on the trail. SPANK’s patented XGT taper process brings comfort and safety, while a Freeride inspired, All Mountain suitable geometry makes the SPOON 785 extremely versatile. With the SPOON 785 Bar, you can save a bit of money without sacrificing quality. Key technologies: XGT Material: MGR Six Series Alloy Weight (g): ±350 (20mm) / ±360 (40mm) Diameter (mm): 31.8 Rise (mm): 20 / 40 Length (mm): 785 Geometry (deg°): 5° up x 8.5° back Finish: shotpeen anodized, laser logos Technologies: XGT, MGR Discipline: race / freeride / trail
Spank Spike 800 Vibrocore Bar
$129.99
The 6th Generation in the evolution of SPANK Industries' race proven SPIKE handlebar, the SPIKE 800 Vibrocore™ delivers World Cup tuned geometries, an increased length of 800mm, and Spank's proprietary impulse and fatigue damping technology. Vibrocore™ bars are injected with a closed cell, low density core, which reduces the high frequency vibrations that lead to hand-arm numbness and fatigue, or Arm-pump. At the same time Vibrocore™ reinforces the structure of the bar internally, increasing ultimate strength, fatigue life, and stiffness, meaning stronger, safer, longer lasting bars with enhanced performance characteristics. By reducing the vibrational energy that transmitted through your SPANK SPIKE 800 Vibrocore™ handlebars to your hands, the rider is left with bar that feels incredibly strong and rigid, while also reducing vibrational fatigue and discomfort. Developed with World Cup DH UR Team racers, Mick and Tracey Hannah, the SPANK SPIKE 800 Vibrocore™ bars have been shown to also improve the rider's sensitivity and tactile response, by eliminating the "white noise" vibrations that dull senses. - Material: MGR Super 6 Alloy - Clamp: 31.8mm - Rise: 15 / 30 / 50mm - Length: 800mm (Adjustable from 740-800mm) - Geometry: 4°Up / 8°Back - Weight: ±340 (15mm) / ± 350 (30mm) / ±360 (50mm) - Finish: Shotpeen-Anodized Finish with Decals - Technologies: Vibrocore™ Vibration Damping Core Dual XGT Tapers with Impact Ends CNC Bending
TruVativ Hussefelt Riserbar
$62.99 - $68.99
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Stylo T30 Riserbar
$73.99
TruVativ's Stylo T30 Riserbar will have you taking on climbs and descents like a champ. This butted aluminum bar is 700mm wide, to give you enough leverage to muscle your rig without weighing you down. And, the multiple rise options let you choose the perfect upright position for greater control in technical sections.
TruVativ Hussefelt Comp Riserbar
$47.99
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Thomson MTB Carbon Trail Handlebar
$199.99
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
3T Riser 740 Pro
$99.99
Built from 7075 aluminum, 3T's Riser 740 Pro slays singletrack, all-mountain lines, and even enduro. Stiff and durable, these bars stand up to heavy use. Rip on them out of every corner and feel the response.
3T Riser 740 LTD
$166.99
Riser 740 is a medium-width, 30mm riser bar with a 9° backsweep. It’s aimed at riders who want more control on cross-country, singletrack and marathon racing, and even light Enduro. 3T compact-cockpit design leaves 264mm total width to either side of stem bulge to mount lock-out levers, cameras, and lights as well as grips, shifters, and brake levers. The bar can be cut down to 680mm width if required. Riser 740 Ltd is built in HM carbon-fiber and is one of the lightest bars of its type at 175g (uncut). - Material:HM Carbon - Clamp Diameter (mm):Ø 31.8 (+ 0.05 / – 0.1) - Back Sweep:9° - Rise (mm):30 - Width (mm):740 - Finish:UD Matt - Weight (g):175
FSA SLK Mountain Handlebar
$223.99
FSA's SL-K handlebar is the ultimate mix of lightweight and strong, for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both carbon and aluminum construction. The carbon helps keep the vibration to a minimum, while the aluminum core maintains its strength. The SL-K handlebar maintains XC weight with Enduro strength. With both medium 18mm rise or flat options and a solid 740mm width, this bar will help with a perfect fit, great control, and utmost performance for even the most demanding rider in mind. - Weight: 235g - Width: 740mm - Material: Carbon - Upsweep: 4° - Backsweep: 9°
Spank Spike 800 Race Handlebar
$109.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 760mm) - Geometry: 4° up x 8° back - Finish: Matte Bead Blast Finish,Laser etched logos
TruVativ Descendant Carbon Riser Handlebar
$273.99
Combine a proven shape, proven width, proven materials you’ve got the Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. - Stiff, precise, and wide - Weight: 230g
Page 1 of 2 Next page