Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Lighting

Blackburn's minimalist Click front light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20 lumen front light - Versatile silicone mounting system - Waterproof to IP-65 standard
Blackburn's minimalist Click light sets are incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar, seatpost, or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20-lumen front - 4-lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
Blackburn's minimalist Click rear light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 4 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 4 lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
Looking for a light set that is simple, affordable, and bright? The Blackburn DAYBLAZER 400 and Click USB combo is just the ticket. The DAYBLAZER 400 features the BLITZ daytime running mode, versatile mounting options, and excellent side visibility, while the Click rear light packs 20-lumens of light in a tiny, easy-to-use package. DAYBLAZER 400 Front Light - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g CLICK USB Rear Light - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time - Lumens: High 20, Flash 20 - Runtime: High 1.5hrs, Flash 3hrs - Weight: 22g/0.05
Not too long ago, a 400 lumen headlight for this price would have been a pipe dream, but now the Blackburn DayBlazer 400 is a dream come true! Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g
"Blazing On A Budget" is how Blackburn should describe this light. Featuring 800 lumens of perfectly-focused night time illumination, their eye popping BLITZ mode to grab the attention of cars, a Go Pro Mount, IP-67 submersibility, and ample side visibility. The DAYBLAZER 800 is going to get you noticed without breaking the bank. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 4 hour recharge time - TIR lenses - Separate action camera mount included - LED Charge Indicator - Runtime: BLITZ 1.5hrs (800 lumen), Medium 3hrs (500 lumen), Low 5 hrs (300 lumen) - Runtime Pulse/Strobe: 8hrs (200 lumen)/12 hrs (200 lumen) - 129g
Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). With the Luminate 360 set, being seen from all angles while cycling has never been easier. The grid side beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. While the grid side beacon can be used as a stand alone light, we believe it works best as part of our Luminate 360 light set. The Dayblazer 400 front light and the 65 rear are spec'd with blitz mode to keep you bright enough to be seen, day or night. - 165 grams (140 front, 48 rear, 58 side) - 4 Lithium polymer/lithium ion batteries included - Rear: Solid 50 lumen, 1.6 hr runtime; High Flash 65 lumen, 3 hr runtime; Low Strobe 35 lumen, 6 hr runtime - Side: High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime - Front: Blitz 400 lumen, 1 hr runtime; Low 200 lumen, 1.5 hr runtime; Pulse 200 lumen, 6 hr runtime; Strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - IP-65 Submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction.
More length. More Options. The Extension Cable extends your connection by 70cm. Place your battery pack in a variety of places. Whether it be in your backpack, on your bike frame or seat post, the Extension Cable gives you the length you need.
Mount your Gemini Light to a GoPro compatible mount. Compatible with: - Duo 2200 Multisport - Olympia 2100 Lumens - Duo 1500 Lumens - Xera 950 Lumens
NiteRider Adapter sold separately from K-EDGE “Combo Mount”. Precision Machined 6061-T6 Aluminum Anodized Gunmetal Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface Enables compatibility with K-Edge GoBig Mounts and Combo Mounts 2x M4 Mounting bolts with Nylok included Compatible with Lumina Series, Mako Series Weight: 11.5 grams
Big things come in small packages, and that is no different with the Blinder Mini Cross front light. Using new COB technology, the Blinder Mini Cross produces a punchy 50 lumens that will ensure you’re seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog’s most individual lights ever, especially for its small, but mighty size. It’s also available as a rear light to make a unique pair. The Blinder Mini Cross front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini’s surface mounted LEDs output 50 lumens with a 20 degree beam, so you’ll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there’ll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don’t need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 50
Big things come in small packages, and that is no different with the new Blinder Mini Cross rear light. Using new COB technology, the Blinder Mini Cross produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Mini Cross rear light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Cross Twin Pack lights. Using new COB technology, the Blinder Minis produce a punchy 50 and 30 lumens for the front and rear lights respectively, that will ensure you’re seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog’s most individual lights ever, especially for its small, but mighty size. The Blinder Mini Cross lights have integrated USB recharging, are 100% waterproof and have an impressive runtime of up to 30 hours on eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini’s surface mounted LEDs output 50 and 30 lumens (front and rear respectively) with a 20 degree beam, so you’ll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there’ll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don’t need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebar and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the Blinder Mini Love front light. Using new COB technology, the Blinder Mini Love produces a punchy 50 lumens that will ensure you’re seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog’s most individual lights ever, especially for its small, but mighty size. It’s also available as a rear light to make a unique pair. The Blinder Mini Love front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 50 UNRIVALLED LED TECHNOLOGY Blinder Mini’s surface mounted LEDs output 50 lumens with a 20 degree beam, so you’ll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there’ll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don’t need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Love rear light. Using new COB technology, the Blinder Mini Love produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The Blinder Mini Love rear light has 8 light modes, integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 30 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the Blinder Mini Skull front light. Using new COB technology, the Blinder Mini Skull produces a punchy 50 lumens that will ensure you're seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog's most individual lights ever, especially for its small, but mighty size. It's also available as a rear light to make a unique pair. The Blinder Mini Skull front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 50 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Skull rear light. Using new COB technology, the Blinder Mini Skull produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The Blinder Mini Skull rear light has 8 light modes, integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the Blinder Mini Love front light. Using new COB technology, the Blinder Mini Love produces a punchy 50 lumens that will ensure you're seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog's most individual lights ever, especially for its small, but mighty size. It's also available as a rear light to make a unique pair. The Blinder Mini Love front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Overview Big things come in small packages, and that is no different with the new Blinder Mini Square rear light. Using new COB technology, the Blinder Mini Square produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Mini Square rear light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 30 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Square Twin Pack lights. Using new COB technology, the Blinder Minis produce a punchy 50 and 30 lumens for the front and rear lights respectively, that will ensure you're seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog's most individual lights ever, especially for its small, but mighty size. The Blinder Mini Square lights have integrated USB recharging, are 100% waterproof and have an impressive runtime of up to 30 hours on eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 and 30 lumens (front and rear respectively) with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebar and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
- Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs
X6 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs
- High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs
Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our e-bike center mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.
Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The sleek and compact form factor of the Fusion Pro StVZO E550 looks great and delivers exceptional performance. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our 31.8mm e-bike Side Mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.
The E-Bike Mega HB StVZO E2000 is an advanced StVZO-certified e-bike cycling front light delivering 2000 lumens of max output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes-600 lumens StVZO or 2000 lumen high beam-via an illuminated handlebar-mounted button. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 16W High Beam. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - High Beam 2000 lumens / Low Beam 600 lumens - Hi-Beam / Low-Beam - StVZO-Optimized lens - High Beam and Low beam controlled with a handlebar button switch with a mode indicator - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 16W HB - Versatile E-bike mounting system compatibility - 130cm power cable with BES3 BOSCH connector included.
The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included
The E-Bike Rack Pro StVZO E40 rear light is StVZO-certified and features 360° visibility Vivid Optics which floods bikes' surrounding area with light for improved rider visibility. Twelve high-output LEDs provide 40 lumens. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It includes 50 and 80mm rack mount spacing, Stainless Allen key hardware and an integrated 135 cm power cable connecting to the e-bike's motor/battery system. E-Bike compatibility: 10.5 – 13.5V input, 1.7W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 40 lumens - Rear Rack mounting for optimum visibility - StVZO-optimized lens with twelve high output LEDs - 360° visibility Vivid Optics floods bikes' surrounding area with light for improved rider visibility - E-bike Compatible 10.5—13.5V input, 1.7W - Rigorously tested to IPX7 Waterproofing standards - 50 and 80mm rack mount spacing - Stainless Allen key hardware resists corrosion - 135cm power cable included
Lezyne replacement mounts for ebike lights.
The Infinite Light Power Pack+ doubles the runtimes of all compatible Lezyne USB-C Front LED units. Compact, versatile design quickly and securely mounts to bars and frames with our adjustable Velcro strap. Its integrated extra-long cable (958mm / 39-inch) plugs directly into lighting systems via waterproof USB-C. This power pack has a 23 Wh and 6600 mAh battery capacity. - Compatible LEDs: Mega Drive 2400+, Super Drive 1800+, Macro Drive 1400+, Lite Drive 1200+, Micro Drive Pro 1000+, Micro Drive 800+, Classic Drive XL 700+, Classic Drive 500+, Fusion Drive Pro 600+, Fusion Drive 500+, Zecto Drive 250+, KTV Drive Pro 300+ - External power pack doubles runtimes of compatible LEDs - 985mm (39") cable length - Can be used as an external USB-C charger for GPS units or mobile phones - Securely mounts to frame with adjustable velcro strap - Powerful 6600 mAh capacity
Page 1 of 16 Next page