Hubs

The Boost 6-Bolt front is specifically for "Boost" disc spacing forks with 110x15mm "Boost" axles. Using the larger diameter hubshell bearing the Boost 6-Bolt is designed to tackle rough terrain and aggressive riding such as downhill and enduro. In an evolving landscape of axle specifications, we are confident that the "Boost" disc location is here to stay. Chris King Boost 6-Bolt front hubs are designed as precision mountain tools. We use one-piece axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra low drag. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Wide flange placement - Fits 110x15mm Boost axles - Legendary made-in-house LD bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our Universal Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Available in 28, and 32 hole spoke count

Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Come in 28h and 32h drilling - Available with Micro Spline, HG or XD driveshell. - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our ISO Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard

Boost Centerlock front hubs are designed as precision mountain tools. Featuring a one-piece axle to provide a stiff hub with rail accurate steering. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra-low drag. - Wide flange placement - Fits 110x15mm Boost spacing - Easily serviceable with a T10 Torx and pick or pen knife - Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty - Hub Drilling: 28 - Hub/Brake Compatibility: Center-Lock Disc - Color: Black - Spoke Interface: J-Bend - Front Axle: 15mm Thru x 110mm

WHY WE MAKE THIS Chris, our founder and spiritual guide, the King himself, is really, in his heart-of-hearts a mountain biker. We make this hub, because it's spiritually imperative that we do so, to honor the dirt that has given us so much inspiration, and to keep Chris happy. WHY YOU WANT IT Our Boost Centerlock front hubs use one-piece axles to provide a stiff hub with rail accurate steering. To keep mud and water out of the works they have heavy-duty bearing seals and snaprings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. - Steel Bearings - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Wide flange placement - Fits 110x15mm Boost - Legendary made-in-house bearings - Easily serviceable with a T10 Torx and pick or pen knife - Completely re-buildable with our Universal Hub Tool - Ceramic bearing upgrade available - Available in 24, 28, and 32 hole spoke count HUB SPECIFICATIONS - Axle Width: 110mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 35.5mm - Center to Flange NDS: 27.5mm

WHY WE MAKE THIS Chris, our founder and spiritual guide, the King himself, is really, in his heart-of-hearts a mountain biker. We make this hub, because it's spiritually imperative that we do so, to honor the dirt that has given us so much inspiration, and to keep Chris happy. WHY YOU WANT IT Our Boost Centerlock front hubs use one-piece axles to provide a stiff hub with rail accurate steering. To keep mud and water out of the works they have heavy-duty bearing seals and snaprings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Wide flange placement - Fits 110x15mm Boost - Legendary made-in-house bearings - Easily serviceable with a T10 Torx and pick or pen knife - Completely re-buildable with our ISO Hub Service Tool - Ceramic bearing upgrade available - Available in 24, 28, and 32-hole spoke count HUB SPECIFICATIONS: - Axle Width: 110mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 35.5mm - Center to Flange NDS: 27.5mm

Boost Centerlock rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and a threaded driveshell seal ring. - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Easily serviceable with a T10 Torx and pick or pen knife - Specifically designed for "BOOST" 148mm x 12mm axle standard - Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty - Hub Drilling: 32 - Skewer Included: No - Hub/Brake Compatibility: Center-Lock Disc

WHY WE MAKE THIS Chris, our founder, and spiritual guide, the King himself, is really, in his heart-of-hearts a mountain biker. We make this hub because it's spiritually imperative that we do so, to honor the dirt that has given us so much, and to keep Chris happy. WHY YOU WANT IT Our Boost Centerlock 148x12 rear hubs use one-piece solid axles to provide a stiff platform that makes your suspension perform better and gets every one of the watts you make into the dirt. To keep mud and water out of the works they have heavy-duty bearing seals and snap rings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. All Chris King rear hubs come with that signature, angry-bee sound. - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - 24h, 28h, and 32h - Available with Micro Spline, HG or XD driveshell - Easily serviceable with a T10 Torx and pick or pen knife - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard HUB SPECIFICATIONS: - Axle Width: 148mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 24mm - Center to Flange NDS: 36.3mm

WHY WE MAKE THIS Chris, our founder and spiritual guide, the King himself, is really, in his heart-of-hearts a mountain biker. We make this hub, because it's spiritually imperative that we do so, to honor the dirt that has given us so much, and to keep Chris happy. WHY YOU WANT IT Our Boost Centerlock 148x12 rear hubs use one-piece solid axles to provide a stiff platform that makes your suspension perform better and gets every one of the watts you make into the dirt. To keep mud and water out of the works they have heavy-duty bearing seals and snaprings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. All Chris King rear hubs come with that signature, angry-bee sound. -Steel Bearings - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - 24h, 28h, and 32h - Available with Micro Spline, HG or XD driveshell - Easily serviceable with a T10 Torx and pick or pen knife - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard HUB SPECIFICATIONS - Axle Width: 148mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 24mm - Center to Flange NDS: 36.3mm

WHY WE MAKE THIS It’s our job to make the best riding hubs in the industry, and 100mm x 12mm front hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We’re proud of it. WHY YOU WANT IT We already said it was the best, but everybody says that. Our R45 Centerlock™ hubs pair a lightweight hub body with our legendary, made-in-house bearings. The result rolls better, lasts longer, and looks way more handsome than anything else out there. The stiffness of our one-piece axle translates to laser-precise bike handling. This hub also comes in one million (actually a handful) of cool colors. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. - Steel Bearings - Engineered, manufactured, and assembled in Portland Oregon - Legendary made-in-house bearings - King Lifetime Warranty - 100mm x 12mm thru axle - Easily serviceable and completely re-buildable with our Universal or R45 Hub Service Tool - Ceramic bearing upgrade available - Available in 24, 28, and 32 hole drillings - Available in Matte finish HUB SPECIFICATIONS Axle Width: 100mm Flange Diameter DS & NDS: 57.4mm Center to Flange DS: 30.6mm Center to Flange NDS: 22.3mm

R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. Product Benefits - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. 135mm x 10mm QR or 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub

WHY WE MAKE THIS It's our job to make the best riding hubs in the industry, and 142mm x 12mm rear hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We think it's the best all-around disc hub on the market. WHY YOU WANT IT R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and Centerlock compatibility. The result rolls better, lasts longer, sounds cooler, and looks way more handsome than anything else out there. On top of all that, the 45 points of simultaneous engagement in this hub improve power transfer and traction thanks to our patented RingDrive system. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. All Chris King rear hubs come with that signature, angry-bee sound. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings · King Lifetime Warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Available with Shiamano/Sram HG or Sram XDR driveshell - 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our Universal or R45 Hub Service Tools - Available in 24h, 28h, and 32h - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub HUB SPECIFICATIONS - Axle Width: 142mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 18.7mm - Center to Flange NDS: 33mm

WHY WE MAKE THIS It's our job to make the best riding hubs in the industry, and 142mm x 12mm rear hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We think it's the best all-around disc hub on the market. WHY YOU WANT IT R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and Centerlock compatibility. The result rolls better, lasts longer, sounds cooler, and looks way more handsome than anything else out there. On top of all that, the 45 points of simultaneous engagement in this hub improve power transfer and traction thanks to our patented RingDrive™ system. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. All Chris King rear hubs come with that signature, angry-bee sound. - Engineered, manufactured, and assembled in Portland, Oregon USA - Legendary made-in-house bearings · King Lifetime Warranty - Patented RingDrive™ system with 45 simultaneously engaged points of contact for virtually drag-free engagement - Available with Shiamano/Sram HG or Sram XDR drive shell - 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Available in 24h, 28h, and 32h - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub HUB SPECIFICATIONS: - Axle Width: 142mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 18.7mm - Center to Flange NDS: 33mm

The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it. - Axle: 15mm Hollow Chromoly Center Axle - Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen) - Shell: 6061-T6 Aluminum 36-Hole - Bearings: 2 x 6902 Sealed Bearings - Cones: 7075-T6 Aluminum Push-On Cones - Guards: Cinema CF Hub Guards - Weight: 11.9oz

Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated Chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Heat-Treated Chromoly - Axle Nuts: 17mm 7075-T6 Aluminum - Shell: 6061-T6 Aluminum 36-hole - Hub Bearings: 2 x 6902 - Driver Bearings: Ceramic Bushing - Driver: 9-Tooth - Drive Side: RHD / LHD Switchable (SDS) - Cones: Thread-On - Guards: Includes DR Rear Hub Guard and CR Rear Hub Guard - Weight: 19.6oz (w/ Guards Installed)

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Dependable Independence – Reliability, versatility, and simplicity united in a hub. Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36 tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

DT Swiss' 350s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. And the Center Lock attachment makes installing and removing disc rotors simple and fast.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provides reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

The Mission Engage is an affordable cassette hub with five precision sealed bearings and a tough heat-treated chromoly straight axle. The driver is a 3-bearing, 3-pawl design for added durability and consistent engagement. The straight axle design ensures plenty of length for hub guards and all peg types. - Material: 6061-T6 Aluminum - Axle: 14mm Heat-Treated Chromoly - Axle nuts: 17mm Chromoly - Bearings: 5 x Durable Sealed Cartridges - Hole count: 36 - Model: RHD - Cassette compatibility: 9T Driver - Weight: 20.3oz

Paul Components WORD single-speed rear hubs are classic, reliable hubs with knurled end caps and Enduro cartridge bearings. - Extra-wide flanges and bearing spaces - Rear hub accepts BMX freewheels with English threads (1.37 x 24 tpi) - Please note that radial lacing voids the manufacturer's warranty - 7075 aluminum axle tube - Adjustable bearing preload

This front hub with a funny name does everything a reliable, serviceable, lightweight front hub should do and more. It spins very smoothly due to specially machined bearing bores and high quality precision sealed cartridge bearings. The axle is turned from high-strength 7075 aluminum, and is available in bolt-on and quick-release versions. Machined here in Chico, California to last a lifetime. - 6061 aluminum shell with oversized 7075 aluminum axle - Adjustable double sealed cartridge bearings and labyrinth seals. 135g - Made in USA

Parts for repair and maintenance of DT Swiss hubs.

This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

Replacement end caps for Stan's NoTubes rear hubs with XD Driver.

Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.