Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

A new standard in tubeless sealant. Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims. Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. - Non-latex ammonia-free formulation - Kevlar reinforced Fiberlink mesh seal - Seals up to 1/4" punctures - Can be used in extreme temperatures, down to -10 degrees Fahrenheit
Pack of 20 tubeless bicycle tire plugs for the Lezyne Tubeless Kit and Classic Tubeless Kit.
Save your thumbs and retain your sanity. The BMT-1 is designed to quickly and easily unseat virtually any bicycle tire bead with minimal effort, particularly on tight-fitting tubeless systems. The locking jaws of the BMT-1 are tightened against the sidewalls using the large adjustment knob, firmly squeezing the tire body. Once the long, strong handle is pulled laterally in either direction, the bead is pulled away from the bead seat and towards the center channel, allowing for removal using a tire lever or other method. Non-marring jaw covers protect the rim and tire from damage. - Compatible with tire bodies from 23 mm to 78 mm (0.91" to 3")
Mastik Pro is the latest and best development in tubular glue to date. It addresses all known challenges for gluing your tubulars. With its quick and easy application, it is possible to glue two tires in under an hour. Mastik Pro cleans up easily with water, making mess on your hands and equipment a challenge of the past. It also has much greater resistance to high temperatures, greatly increasing safety, especially for long descents. The new Mastik Pro is non-flammable, so it can be carried everywhere, regardless of the mode of transport. Glued tubulars are rideable in 24 hours. - Designed to work especially well when using Vittoria's "Perfect Match" tubular wheel and tire system - High Temperature Resistance to over 120 degree Celsius - Quick and easy application with 24hr dry time - 40g total (40 1g tubes)
$4.99
A comprehensive patch kit for all puncture sizes. - Contains 7 assorted patches, 1 metal buffer and 1 tube of rubber cement
$4.99
- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion - Suitable for all kinds of punctures - Convenient plastic case is compact and easy to carry on every ride - No glue needed
$5.99
The ideal trail-side repair kit. - Contains 6 patches, 1 metal buffer, 2 tire levers and 1 tube of rubber cement
$6.00 - $69.99
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex
$6.50
Knurled 6061 aluminum valve caps for a little touch of swag. - Material: Knurled 6061 Aluminum - Valve Type: Schrader
$7.99
- Available in 1.5mm & 3mm plug sizes. - 6 plugs per pack, in 2 sheets of 3 plugs - Designed to fit perfectly into the body of Peaty’s Holeshot Tyre Puncture Plugger tool - Packaged using recycled cardboard header cards and biodegradable bags
$8.99
- Shim adds support to Presta stem used in a Schrader rim
$9.49
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
$10.99
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$11.99
Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).
$13.95
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
$13.99
Made from high-quality polyester that is light, yet withstands high pressures. The special adhesive prevents slipping under high loads and temperatures. Pair-set with valve hole. - Max: 145 psi - Sold in pairs (boxed)
$13.99
- Steel Presta valve adapter, allows the use of a Schrader air nozzle to inflate a Presta valve - Includes a chain attachment, to fasten the adapter on a floor pump
$14.49 - $239.99
Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required
$14.99
- For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
$14.99
Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!
$15.99
Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g
$16.49
The Lezyne Tubeless Pro Plugs are the most reliable solution for repairing a tubeless bike tire tread at home or in a workshop. These innovative mushroom plugs fill the hole and seal the puncture from the tire, maximizing the life of your tire. You can be sure that your repair will hold up even under the most extreme conditions, so you can keep riding worry-free. The kit includes three sizes of plugs. With two 3mm, two 3.5mm, and two 4.5mm plugs, you can be sure you'll have the right size to fit your tubeless tire. The kit also includes two abrasive pads and two rubber cement tubes to ensure a secure seal. - Mushroom plugs that fill the hole and seal the puncture from the inside of the tire - Includes three plug sizes: 3mm, 3.5mm, and 4.5mm, two abrasive pads, and two rubber cement tubes for a secure seal. - Most reliable solution for repairing tubeless bike tire tread at home or in a workshop.
$18.00
Tubeless Universal Valve—SRAM MTB - Removable Valve Core - Includes 1 tubeless valve & 1 valve core wrench Compatible With: WH-RISE-60-B1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-A1, WH-ROAM-60-B1
$19.99
- CNC machined 7075 alloy construction - Sealed base prevents high pressure leaking - Designed to work with Aero dish rims - 30mm, 50mm and 70mm available
$19.99
- Double-sided tubular tape for installing tubular tires with no mess or waiting - Special activated surface of gluing tape makes installation and centering of a tubular tire on a rim very fast and easy
$19.99 - $26.99
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
$20.99
- Latex-based formula which can simultaneously inflate and seal most common punctures quickly - Works with tubes, tubeless, and tubular tires - Proven to seal up to a 6mm puncture on tubeless tires, getting you back in the saddle faster - Enough pressure to seat a tubeless tire onto a rim - Comes with an easy-to-use hose adapter and both Schrader and Presta valve compatible threaded nozzles - Fills a 29 x 2.4 MTB tire up to about 29psi
$20.99
A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox
$21.99 - $214.99
- Ammonium/latex/protein free sealant
$22.49
Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm
Page 1 of 4 Next page