Parts & Accessories

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.

These are the zip ties included in with our Fit Kits - Special stainless steel metal tang on the zip tie provides high strength 120lb load rating. - UV resistant material for outdoor adventures. - Panduit # BT2LH-TL0

Fit Kit SET706.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle. This kit includes: - 12 x 125mm thru axle with 1.0 mm thread pitch, with spacer for 119mm spacing - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. - Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET712.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle. This kit includes: - 12 x 122mm thru axle with 1.75 mm thread pitch - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch - Spacers to reduce the length to 128 mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame If mounting on a Fox Gravel Fork, please also order 377-1240. We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET810 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle. This kit includes: - 12 x 192—198mm thru axle with 1.75 mm thread pitch - Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes. - Pair of 14" extenders. Stabilize and level the rack. - A pair of OMM Pucks. Allows for an upper attachment point for the rack. - Stainless steel mounting hardware - Clear protective tape - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET806 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your fat bike with a 12mm rear thru axle. This kit includes: - 12 x 209mm thru axle with 1.5 mm thread pitch - Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes. - Pair of 14" extenders. Stabilize and level the rack. - A pair of OMM Pucks. Allows for an upper attachment point for the rack. - Stainless steel mounting hardware - Clear protective tape - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm..

Fit Kit SET809 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 209mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET807 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 217—229mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

Featuring composite construction, Lezyne's Caddy QR Mount provides a simple attachment to your seat rails. It's compatible with all Lezyne QR Caddys.

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate - Full-size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate

- 250mm seat stays for the Classic Disc Rack (PN 730387-01) - Sold as a pair

Round Monostay Adapter - Hardware included

- 4 removable plastic hooks - To tighten, pull inner cord over additional hook - 25cm x 25cm (10" x 10") unstretched - Durable 3.5mm diameter bungee cord

- Soft non-slip webbing material - Triple strap strength to hold down cargo - Double vinyl hooks for secure mounting - 24-inch length works with most racks

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

This water resistant cover protects your pack and its contents from the elements. Attaches securely with a hook and loop closure and drawstring. To attach the rain cover to your pack, pass the black elastic strap under your shoulder straps, then thread it through the Grey woven loop and attach the Velcro. Once it's attached, you can pull the drawstring at the bottom of the rain cover so it fits your pack snugly. Features - Bright yellow gives daytime visibility; reflectivity for low-light - Small / Medium fits Blowfish, Cloud Walker, Day Star, and other packs between 1000 and 1500 cu in or 16L to 25L - Medium / Large fits packs between 1500 and 2300 cu in or 25L to 38L - Includes three easy-to-use attachment points, plus a cinch system for secure fit

EX-1 Disc Quick Release replacement compatible with Expedition 1 Disc Rack.

Fit your Outpost Front Rack with the Blackburn lower mounts.

Fit your Interlock and Central Rear Racks with the Blackburn lower mount medium kit.

Fit your Outpost Rear Rack with the Blackburn lower mount small kit.

Rack Fit System Long Quick Release. Compatible with: - Outpost Front Rack - Outpost Rear Rack - Central Rear Rack - Interlock Rear Rack

Rack fit system upper mount kit compatible with a range of racks. Compatible with: - Outpost Front Rack - Outpost Rear Rack - Central Rear Rack - Interlock Rear Rack - Outpost Fat Bike Rack

• Magnetic attachment for Barrier Handlebar Bag (sold separately) • Clear on both sides for maximum usability • Waterproof pressure-zip closure • Touch screen friendly • 19.5 mm wide x 27.5 mm long

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - Carrier plate for rear racks that are not MIK ready. - Adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place. Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm. Features: - The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil. - Attach at the rear luggage carrier of conventional and electric bike frames. - The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.

- The Basil Buddy Space Frame can be used in combination with the Basil Buddy Dog Bicycle Basket. - This wire dome is made from hard-wearing steel and prevents your dog from jumping free of their basket while you’re out riding. - This wire dome comes in classic black. - Provides complete protection for your dog and total peace of mind for pet owners when out cycling.

Bungee-style tie down straps for securing large and/or awkward loads. CONSTRUCTION • Heavy-duty elastic with T6 hardened aluminum hooks ADDED BENEFIT • Pair with panniers for convenient top loading option

Replacement hardware for Axiom rear racks. - Includes upper arms and mounting hardware

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Hardware for use with Axiom bags.

Axiom's Rain Cover Trunk keeps your trunk bag dry when the weather turns foul. It's waterproof thanks to the seam-sealed, PVC-coated Nylon Oxford fabric, and the bright yellow color helps keep you seen in low light conditions. It even stores away compactly when you're not using it.

Axiom's Handlebar Rain Cover is a lightweight and packable solution for rainy days. It's made from seam-sealed, PVC-coated Nylon Oxford fabric and slips over your handlebar bag (sold separately) quickly and easily. The bright yellow cover enhances visibility too.

Helps with mounting pannier rack onto mono-stay frames. - Durable vinyl coating