Clearance

ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger 2.1 RC2 damper features independent high and low-speed compression adjustments - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately

RockShox's Reba RL fork gives your bike smooth, consistent bump absorption in a light yet stiff chassis. It sports RockShox's Motion Control damping with external rebound and compression adjustments as well as their Solo Air spring that lets you custom tune the Reba for your riding style and trail conditions. No matter how or where you roll, with its butted aluminum steerer, hollow crown, and 32mm-diameter Fast Black aluminum stanchions, the Reba tracks like a dream. Plus, you can lock the fork out for the ultimate in efficiency on smooth sections.

It's an all-new derailleur that's specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider's liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings. - Enduro focus and trail ready - Forged aluminum cage - Stainless hardware - Black/Polar colorways - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.

Sprint-worthy stiffness meets climb-friendly weight in Cannondale's Hollowgram Si Road Crank Set. Cannondale's One Piece Integration 3D forging is the secret to keeping this aluminum crank feathery-light and incredibly stiff. Plus, it's finished off with FSA's high-performance chainrings for flawless 10-speed shifting.

- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

Enjoy unparalleled comfort and performance in a saddle shaped for you. The groundbreaking design reinvents saddle making to create an incredibly responsive, comfortable, light and durable saddle. Flat is for flat out: The Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement. Learn more about saddle fit. - Award-winning construction technique - Flexible base and soft foam - Three profiles to suit your riding style - Suitable for all cycling disciplines - Multiple ‘Best in Test’ winner - Rails: Carbon (7 x 9mm) - Base: Flexible nylon - Cover: Waterproof - Profile: Flat - Weight: 176g - Width: 142mm - Length: 282mm - Mid rail to saddle topper: 47mm

Enjoy unparalleled comfort and performance in a saddle shaped for you. The groundbreaking design reinvents saddle making to create an incredibly responsive, comfortable, light and durable saddle. Radius is for cruising: The Radius profile has the roundest shape through the rear section and maximum padding. The Radius profile is designed for an upright riding position; typically bikes in this category have handlebars slightly higher than the saddle, causing the rider to sit taller and requiring the most padding to support their weight. - Award-winning construction technique - Flexible base and soft foam - Three profiles to suit your riding style - Suitable for all cycling disciplines - Multiple ‘Best in Test’ winner - Carbon: Rails (7 x 9mm) - Base: Flexible nylon - Cover: Microfiber - Profile: Radius - Weight: 194g - Width: 142mm - Length: 282mm - Mid rail to saddle topper 48mm

Enjoy unparalleled comfort and performance in a saddle shaped for you. The groundbreaking design reinvents saddle making to create an incredibly responsive, comfortable, light and durable saddle. Shallow is for everyone: The Shallow profile has a more rounded rear section and medium padding. This profile is for riders leaning forwards, in a more natural riding position; typically the handlebars will be slightly lower than the saddle with the rider’s weight being split between the saddle and handlebars more evenly, requiring less padding on the saddle. - Award-winning construction technique - Flexible base and soft foam - Three profiles to suit your riding style - Suitable for all cycling disciplines - Multiple ‘Best in Test’ winner - Rails: Carbon (7 x 9mm) - Base: Flexible nylon - Cover: Mircofibre - Profile: Shallow - Weight: 198g - Width: 142mm - Length: 282mm - Mid rail to saddle topper: 49mm

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp

Explore even further afield with a saddle designed for big days out. Fabric's Line saddle ditches the traditional hard, stretched cover for a ground-breaking three-piece bonded design. As well as this, the Line has a full-length pressure relief channel, creating a saddle of supreme comfort, lightness and durability. Shallow is for everyone: The Shallow profile has a more rounded rear section and medium padding. This profile is for riders leaning forwards, in a more natural riding position; typically the handlebars will be slightly lower than the saddle with the rider’s weight being split between the saddle and handlebars more evenly, requiring less padding on the saddle. - Award-winning construction technique - Flexible base and soft foam - Full length pressure relief channel - Suitable for all cycling disciplines - Rails: Cro-mo (7mm) - Base: Flexible nylon - Cover: Microfiber - Profile: Shallow - Weight: 250g - Width: 134mm - Length: 270mm - Mid rail to saddle topper: 45mm

Take comfort to the next level with the Scoop Gel. The innovative Scoop saddle replaces the traditional hard, stretched cover with Fabric's ground-breaking bonded design to create a saddle of supreme comfort, lightness and durability. The gel inserts super-charge this support for premium comfort on your ride. - Award-winning construction technique - Flexible base and soft foam - Suitable for all cycling disciplines - Multiple ‘Best in Test’ winner - Three large gel inserts - Rail: Cro-mo (7mm) - Base: Flexible nylon - Cover: Microfiber + Gel - Profile: Radius - Weight: 280g - Width: 155mm - Length: 260mm - Mid rail to saddle topper: 48mm

It might look normal from the outside, but the engineering inside this incredible chain design is anything but normal, and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life.

When you need a saddle to work as hard as you do, the Tri saddle delivers. Rigorously designed to meet the grueling demands of triathletes and time-trialists, the feature-packed saddle comes with integrated bottle mount and a central pressure relief channel. Flat is for flat out: The Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement. - Award-winning construction technique - Full-length pressure relief channel - Removable bottle mount - Integrated bike hanger - Drainage channels - Rails: Carbon (7x9mm) - Base: Flexible nylon - Cover: Waterproof - Profile: Flat - Weight: 176g - Width: 134mm - Length: 240mm - Mid rail to saddle topper: 46mm

Designed in collaboration with Brandon Semenuk, the Overture is used by more pros than any other slopestyle saddle. Tailored to the needs of the slopestyle and dirt-jump rider, the Overture is designed to compliment trick variations by being grip-able, pinch-able yet slim and easy to move around. Brandon's design features a silicone print pinch area with subtle flares in the rearward body to compliment leg-pinch and no-hand tricks. A lot of people also run the Overture on their DH rig, and it has been known to find its way onto the occasional trail bike.

This is Continental's glue for gluing tubular ("sew-up") tires on aluminum tubular rims. The container has a brush built into the screw-on cap for easy glue application. You get enough glue to install about 12 tires.

- Performance unisex saddle - Short nose allows for a more aggressive, aero riding position - Pressure relief channel provides all day comfort - Wide rear width provides additional stability - Tuned to deliver comfort on race day All day performance Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead. - Rails: Cro-Mo (7mm) - Base: Flexible Nylon - Cover: Waterproof microfibre - Profile: Flat - Weight: 240g - Width: 155mm - Length: 240mm - Mid rail to saddle topper: 45mm Short for speed The latest evolution of our award-winning Line Saddle, we’ve combined our technological know-how and experience along with thousands of riding hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient. Increase your endurance Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivaled comfort on an all-out performance saddle. Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you’re heading to the podium or your new PB. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.

- Carbon fiber shaft provides superior road vibration damping for improved-comfort - Low-profile twin-bolt head offers infinite seat angle adjustment, available in 15mm and zero offset to help riders fine tune bike fit - Extended rail clamp reduces load to the saddle rails and offers rock solid saddle installation and power transfer

- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.

Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride. - Sleek styling with maximum strength and stiffness - Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong - 31.8mm clamp interface - Weight: 185 grams (100mm length)

- Hollow steel axle for lightness and durability, a composite body, and tension adjustment to customize the feel of the pedal underfoot. - The exclusive ATAC clamping system offers very easy engagement, and the open design automatically clears debris each time you step in. Specs: - Pedal Material: Carbon - Pedal Weight: 145g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Boost 3mm offset

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Galaxy series adds just enough color to mix or match with any bike. - Super Sticky PU (top layer): Superior supple hand feel with long-lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maxamizes grip. - Tackiest/Best Hand Feel - Long-lasting PU tape - TruNeon: Super Bright, Exclusive Colors 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes

Vittoria introduces Universal Sealant, the new range of anti-puncture bike tire sealants designed for Road and MTB use. The formula of the sealant has been improved. Universal Sealant does not contain ammonia, repairs larger punctures (up to 7mm), acts faster, and is compatible with both Road and MTB tubeless tires and with any type of inner tube. It is easy to use thanks to its specific pour spout that allows the application of the sealant straight from the valve. Universal Sealant is the universal anti-puncture bike tire sealant.

- Hollow steel axle that makes it light and durable, as well as TIME's exclusive ATAC system that offers very easy engagement. - The open design automatically clears debris each time you step in for reliable performance every time. Specs: - Pedal Material: Composite - Pedal Weight: 147g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Completely renewed, sporting a dynamic tread pattern design. Matches with a race bike, as well as a classic city road bike. Available in a wide range of dimensions and colors. PureGrip Compound Based on activated silica compounds, this technology was originally intended as an performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. Whilst providing great grip, it is also long lasting and highly durable – both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). Suitable for E-Bikes For our E-Bike tyre we fall back on over 100 years' experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high quality structure, puncture protection is high and the rolling resistance is low offering protection from premature wear brought about by the additional driving force.