Parts & Accessories
Strapless design for quick-and-easy entry and release. - Improves power transfer for efficient pedaling and helps keep feet in correct position on pedals - Durable nylon construction - In-molded anti-slip tread pattern - Includes mounting hardware - 62g per pair
$22.99 - $26.99
- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
$19.99 - $21.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Customize your 5050 pedals with Crank Brothers' Plate Kit. These anodized beauties bolt onto your existing pedals to give you style to match your skills.
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: - enduro catridge bearings - igus LL-glide bearings - double seal system (internal and external seals) - hex alloy end caps - o-rings - nuts - sleeve bushings - bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup. - Weight (pair): 86 grams - Shoe compatibility: LOOK/SPD-SL - Release angle: 15 or 20 degrees
Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm
- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Don't let pedal issues keep you from training. This replacement pair of anti-slip LOOK Kéo-compatible cleats with 6 degree or 0 degree float (depending on the version selected) will keep your Vector pedals turning and your training on track. - Compatible with all Garmin Vector Pedals
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
Look's replacement cleats for their Delta Pedals are made of polyamide nylon with Teflon toe and heel inserts for easy entry/exit, efficient pedaling, and durability. Molded wear indicators show when it's time to replace your cleats, and they are available with 9-degrees of float (red), and 0-degrees of float (black).
- Replacement cleats for X-Track pedals
$27.99 - $29.99
Look's replacement cleats for their classic Keo pedals are made of polyamide nylon with Teflon toe and heel inserts for easy entry/exit, efficient pedaling, and long-lasting durability. Molded wear indicators tell you when it's appropriate to replace your cleats. These cleats are available with three different amounts of float: 4.5-degrees (gray), 9-degrees (red), and fixed float (black). - These cleats are compatible with Look Keo pedals (sold separately). - These cleats use the Look/SPD-SL bolt pattern.
- The X-TRACK EASY CLEAT offers a larger clip out range with a lateral and angled release possibilities
Look's Keo Grip Cleats feature special anti-slip surfaces on the bottom that improve traction while walking. They are made of polyamide nylon for easy entry/exit, efficient pedaling, and durability. And, there are wear indicators that tell you when it's time for new cleats. The Keo Grip cleats are available with three different amounts of lateral float: 4.5-degree (gray), 9-degrees (red), and fixed float (black). - These cleats are compatible with Look Keo pedals (sold separately). - These cleats use the Look/SPD-SL bolt pattern.
Look's S-Track Cages increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. They give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Compatible with Look S-Track pedals (sold separately)
Look's S-Track Sauser Cage increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. They give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Adaptable to all of the S-Track range (sold separately) - 25g
Look's S-Track Enduro Cage increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. Constructed from lightweight aluminum, they give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Adaptable to all of the S-Track range (sold separately) - 60g
Page 1 of 2 Next page