Other

Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.

Wrist Comfort Bend provides easy hand clearance for a more-relaxed aero bar setup. They are especially suitable for a wide-aero setup. This extension shape is supplied as a standard with the super-adjustable Vola aero bar, which won ‘Best of Show’ at Eurobike 2013. - Pro version is alloy, with shot-peened, black anodized finish. - Team version is carbon The kit comprises clamps, new comfort cradles and silicone pads, wrist comfort bend extensions, and all fixing hardware. Stack height can be adjusted in the range 57–87 mm using the Riser Kit (separately available).

A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish

Forged Alloy seat-clamp.

Lightweight alloy lever. - Strong Cro-mo axle

Forged Alloy seat-clamp with QR lever.

Converts 31.8mm bar clamp diameter stems to accommodate smaller bar sizes.

Fun handlebar-mount streamers. - Quick and easy installation

Forged Alloy seat-clamp. - Offset cut is safer to use with carbon posts

Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp

This custom-made Dropper Post Adapter allows Backcountry Saddle Packs to be used on mountain bike dropper seatposts. The adapter is designed to hold the pack securely, while also limiting travel to avoid damage to either the post or the bag. Comes with a choice of shims for dropper posts with 30.9mm, 31.6mm and 34.9mm lower diameters and is easily fitted using a 3mm hex wrench. The broad, flat rear section and ridged strap retainer improve stability over rough terrain and the adapter is also compatible with any bag that uses a 25mm seat post strap (or smaller). - Designed to work with MTB dropper posts with a 25mm or 26mm upper section diameter - Injection moulded glass-reinforced nylon for durability - Silicone shim for a secure fit - 4.5 x 4.8 x 3.5cm - 53g

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- 90 degree

Disc Brake Adapters

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

5mm Spacers for internal travel adjust of REVIVE and REVIVE MAX dropper posts

Replacement foam rings and bottom out bumper for your REVIVE MAX dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Valve-extension-adapter. Allows easier access to your dropper valve for shock-pumps with short valve heads.

Kit includes: - x2, Bolts (M5) with conical washers (T25 head) - x2, Barrel nuts Compatible with: - REVIVE / REVIVE 2.0 - REVIVE MAX - DIVINE - DIVINE SL - DIVINE SL RASCAL

Multi-purpose suspension grease. Special additives help prevent corrosion and seizure and keep wipers and seals smooth when using it for routine services on your BikeYoke dropper post. - Suitable for all BikeYoke dropper posts - Size: 30ml (lasts for 5+ full services)

Squeezy—not just another seat clamp. We never just want to make something, that´s already there. We want to make something different, something better. Unlike other seat clamps, Sqeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seattube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seattube and smoothly secures your seatpost in place. - Material: AL7075-T6, fine-feed CNC finish - Titanium T-25 clamping bolt - Collar-less design for more even clamping force distribution - Three Slip-Stopp installation aids - Only 8g !

BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts. The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear. - Suitable for all BikeYoke dropper posts - Size: 250ml (lasts for several full services)

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

A neat little gadget, that is particularly interesting for anyone who likes to wrench on their bike. Designed like an ordinary headset spacer, the Aimy slides onto the steerer tube and has a stainless steel bolt that clamps down so that the steerer tube cannot fall through your headset, once you take off your stem. - Machined from aluminum - Fits 1-1/8" steerer tube - Thickness: 8mm - Weight: 8g