Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Bike Lights

Blackburn's minimalist Click light sets are incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar, seatpost, or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20-lumen front - 4-lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
Looking for a light set that is simple, affordable, and bright? The Blackburn DAYBLAZER 400 and Click USB combo is just the ticket. The DAYBLAZER 400 features the BLITZ daytime running mode, versatile mounting options, and excellent side visibility, while the Click rear light packs 20-lumens of light in a tiny, easy-to-use package. DAYBLAZER 400 Front Light - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g CLICK USB Rear Light - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time - Lumens: High 20, Flash 20 - Runtime: High 1.5hrs, Flash 3hrs - Weight: 22g/0.05
Not too long ago, a 400 lumen headlight for this price would have been a pipe dream, but now the Blackburn DayBlazer 400 is a dream come true! Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g
"Blazing On A Budget" is how Blackburn should describe this light. Featuring 800 lumens of perfectly-focused night time illumination, their eye popping BLITZ mode to grab the attention of cars, a Go Pro Mount, IP-67 submersibility, and ample side visibility. The DAYBLAZER 800 is going to get you noticed without breaking the bank. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 4 hour recharge time - TIR lenses - Separate action camera mount included - LED Charge Indicator - Runtime: BLITZ 1.5hrs (800 lumen), Medium 3hrs (500 lumen), Low 5 hrs (300 lumen) - Runtime Pulse/Strobe: 8hrs (200 lumen)/12 hrs (200 lumen) - 129g
Big things come in small packages, and that is no different with the Blinder Mini Cross front light. Using new COB technology, the Blinder Mini Cross produces a punchy 50 lumens that will ensure you’re seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog’s most individual lights ever, especially for its small, but mighty size. It’s also available as a rear light to make a unique pair. The Blinder Mini Cross front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini’s surface mounted LEDs output 50 lumens with a 20 degree beam, so you’ll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there’ll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don’t need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 50
Big things come in small packages, and that is no different with the new Blinder Mini Cross rear light. Using new COB technology, the Blinder Mini Cross produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Mini Cross rear light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Cross Twin Pack lights. Using new COB technology, the Blinder Minis produce a punchy 50 and 30 lumens for the front and rear lights respectively, that will ensure you’re seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog’s most individual lights ever, especially for its small, but mighty size. The Blinder Mini Cross lights have integrated USB recharging, are 100% waterproof and have an impressive runtime of up to 30 hours on eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini’s surface mounted LEDs output 50 and 30 lumens (front and rear respectively) with a 20 degree beam, so you’ll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there’ll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don’t need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebar and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the Blinder Mini Love front light. Using new COB technology, the Blinder Mini Love produces a punchy 50 lumens that will ensure you’re seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog’s most individual lights ever, especially for its small, but mighty size. It’s also available as a rear light to make a unique pair. The Blinder Mini Love front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 50 UNRIVALLED LED TECHNOLOGY Blinder Mini’s surface mounted LEDs output 50 lumens with a 20 degree beam, so you’ll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there’ll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don’t need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Love rear light. Using new COB technology, the Blinder Mini Love produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The Blinder Mini Love rear light has 8 light modes, integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 30 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the Blinder Mini Skull front light. Using new COB technology, the Blinder Mini Skull produces a punchy 50 lumens that will ensure you're seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog's most individual lights ever, especially for its small, but mighty size. It's also available as a rear light to make a unique pair. The Blinder Mini Skull front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 50 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Skull rear light. Using new COB technology, the Blinder Mini Skull produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The Blinder Mini Skull rear light has 8 light modes, integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the Blinder Mini Love front light. Using new COB technology, the Blinder Mini Love produces a punchy 50 lumens that will ensure you're seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog's most individual lights ever, especially for its small, but mighty size. It's also available as a rear light to make a unique pair. The Blinder Mini Love front light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Overview Big things come in small packages, and that is no different with the new Blinder Mini Square rear light. Using new COB technology, the Blinder Mini Square produces a punchy 30 lumens that will ensure you're seen and safe in all lighting conditions. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Mini Square rear light has integrated USB recharging, is 100% waterproof and has an impressive 30 hour run-time when using eco-flash mode. - Dimensions: H: 40mm x W: 33mm x L:31mm - Weight: 17 grams - Lumens: 30 UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 30 lumens with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
Big things come in small packages, and that is no different with the new Blinder Mini Square Twin Pack lights. Using new COB technology, the Blinder Minis produce a punchy 50 and 30 lumens for the front and rear lights respectively, that will ensure you're seen and improve your safety in all lighting conditions. The graphic flash pattern has 8 different modes, which makes this Blinder Mini one of Knog's most individual lights ever, especially for its small, but mighty size. The Blinder Mini Square lights have integrated USB recharging, are 100% waterproof and have an impressive runtime of up to 30 hours on eco-flash mode. UNRIVALLED LED TECHNOLOGY Blinder Mini's surface mounted LEDs output 50 and 30 lumens (front and rear respectively) with a 20 degree beam, so you'll be seen from up to 800m away. They have a run time of up to 30 hours on eco-flash mode and come programmed with 8 light modes: steady high, steady low, low flash, high flash, fading flash, pulse flash, accelerating flash and eco-flash. SIMPLE & SMART FASTENING SYSTEM Weighing just 17 grams, the Blinder Mini comes with two silicone straps. A small strap for bars and seat posts 22 – 32mm+ diameter, and large strap that will fit tubes and head tube profiles with a circumference of up to 200mm. Our tool-less mounting system makes attaching your light incredibly simple and silicone straps means there'll be no chance of damaging your bikes frame. INTEGRATED USB RECHARGEABLE You don't need any cables to charge your Blinder Mini. Just un-clip, remove from seat post or handlebar and plug straight in to any available USB-A socket to recharge. No external charge cables = no worries + many hours of cable searching saved. 3.5 hours to recharge fully. When your Blinder Mini is running low on battery, a red ring will light up around the button. This ring will turn green and then turn off once the light is fully charged and ready to go.
- Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs
X6 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs
- High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs
Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our e-bike center mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.
Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The sleek and compact form factor of the Fusion Pro StVZO E550 looks great and delivers exceptional performance. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our 31.8mm e-bike Side Mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.
The E-Bike Mega HB StVZO E2000 is an advanced StVZO-certified e-bike cycling front light delivering 2000 lumens of max output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes-600 lumens StVZO or 2000 lumen high beam-via an illuminated handlebar-mounted button. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 16W High Beam. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - High Beam 2000 lumens / Low Beam 600 lumens - Hi-Beam / Low-Beam - StVZO-Optimized lens - High Beam and Low beam controlled with a handlebar button switch with a mode indicator - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 16W HB - Versatile E-bike mounting system compatibility - 130cm power cable with BES3 BOSCH connector included.
The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included
The E-Bike Rack Pro StVZO E40 rear light is StVZO-certified and features 360° visibility Vivid Optics which floods bikes' surrounding area with light for improved rider visibility. Twelve high-output LEDs provide 40 lumens. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It includes 50 and 80mm rack mount spacing, Stainless Allen key hardware and an integrated 135 cm power cable connecting to the e-bike's motor/battery system. E-Bike compatibility: 10.5 – 13.5V input, 1.7W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 40 lumens - Rear Rack mounting for optimum visibility - StVZO-optimized lens with twelve high output LEDs - 360° visibility Vivid Optics floods bikes' surrounding area with light for improved rider visibility - E-bike Compatible 10.5—13.5V input, 1.7W - Rigorously tested to IPX7 Waterproofing standards - 50 and 80mm rack mount spacing - Stainless Allen key hardware resists corrosion - 135cm power cable included
Lezyne's Macro Drive 1100XL is a high-performance LED cycling light with a compact, durable and heat-dissipating machined aluminum body. Two market-leading, ultra-high-output LEDs delivering up to 1100 lumens. Optional Overdrive Race Mode toggles between Overdrive and Economy modes only. Mode Memory function returns to selected mode after turning off. Enhanced MOR (Maximum Optical Reflection) lens with side visibility. High-speed 2 Amp USB charging capabilities (with compatible wall adapter). Versatile strap securely mounts to all standard bar shapes, including aero bars. Advanced Li-Ion battery for superior run time.
Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.
Lumina Micro series delivers high output in a small package, making it great for helmet usage. Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab - 4 light levels plus a flash mode - Lumina Micro 900 and 650 include a VMAX+ - Lumens: 650/80 - Run time: up to 50 hrs F/up to 27 hrs R - Weight: 130g/28g
Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. LUMINA™ MICRO 900 FEATURES - Lumen Output: 900 - 5 Modes with Run Times: 2:00 – 60:00h - Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA - Weight: 130g - Low Battery Indicator and Micro USB Rechargeable - Water / Dust Resistant IP64 Rated LUMINA™ MICRO 900 RUN TIMES Low - 11:00h at 200 Lumens Med - 4:30h at 450 Lumens High - 2:00h at 900 Lumens Flash - 11:00h at 900 Lumens Walk - 60:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in the last mode used) Vmax+™ 150 RUN TIMES Fast Flash - 11:30h Slow Flash - 9:30h Disco Flash - 9:45h Pulse Flash - 6:00h High Steady - 4:30h Low Steady - 25:30h Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold the power button for 8-10 seconds to lock/unlock.
The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h
Rear light for added visibility and safety, easily attached to Thule Yepp Maxi.
$9.99
- 1 super bright LED - Easy On/Off - Never worry waterproof design - Universal rubber bracket
$10.49
Head and Tail Light features: - off-constant-flash-chasing - 2 x AAA (1.5V – LR3) - batteries included - 50/100 hours of burn time (constant/flash) - 400m visibility
Page 1 of 13 Next page